| 标准： | ASTM B363; ASME SB363 | 材料 | 二级 |
|---|---|---|---|
| 类型 | Titanium Alloy Steel Buttweld Elbow | 学位 | 45/90/180 |
| 半径 | 长半径/短半径 | 尺寸 | 1/2"-48"（DN15-DN1200）或定制尺寸 |
| 厚度 | SCH10S-XXS | 表面： | 喷砂 |
TITANIUM ALLOY/UNALLOYED TITANIUM STEEL BUTTWELD FITTING ASTM B363 WPT2 ELBOW BEND
概述：
Titanium grade 2 elbow is a type of pipe fitting that is made from commercial pure titanium， also known as Grade 2 titanium. Grade 2 titanium is widely used due to its excellent corrosion resistance， good formability， and weldability. It contains a small amount of palladium， which enhances its corrosion resistance.
An elbow， in the context of pipe fittings， is a device that changes the direction of the flow in a piping system. It is typically used to connect two pipes of different diameters or to change the direction of fluid flow in a piping system.
When it comes to applications， titanium grade 2 elbows are commonly used in industries where corrosion resistance and strength-to-weight ratio are critical factors， such as chemical processing， marine environments， aerospace， medical implants， and more.
The specific design， dimensions， and specifications of a titanium grade 2 elbow can vary based on the intended application and industry standards. It's essential to ensure that the elbow meets the required standards and specifications for the specific application.
Overall， titanium grade 2 elbows are valued for their corrosion resistance， lightweight nature， and strength， making them a valuable component in various industrial and commercial applications.
规格
| 标准 | ASTM B363 & Its equivalent ASME， DIN & EN Standard. |
| 年级 | 二级 |
| 尺寸 | 1/2''-48''或定制尺寸 |
| 壁厚 | SCH10S 至 SCH.XXS |
| 半径 | SR LR |
| 结束 | 斜角端 |
| 表面 | 喷砂 |
| 包装 | 胶合板箱/托盘 |
化学成分
| 等级 | C | O | N | H | 铁 | Other Elements each | Other Elements total |
| WPT2 | 0.08 最大值 | 最大 0.25 | 0.03 最大值 | 0.015 最大值 | 0.3 最大值 | 最大 0.1 | 0.4 最大值 |
机械性能
| 等级 | 拉伸强度 最小， ksi (MPa) | 屈服强度 最小， ksi (MPa) | 2 英寸伸长率 或 50 毫米，最小值（%） |
| WPT2 | 50(345) | 40(275)-65(450) | 20 |
尺寸
| 标称尺寸 | 锥齿轮外径 (毫米) | 中心至终点 (毫米) | |||
| 90° 弯头 | 45° 弯头 | ||||
| DN | NPS | O.D. | A | B | |
| LR | SR | LR | |||
| 15 | 1/2 | 21.3 | 38 | … | 16 |
| 20 | 3/4 | 26.7 | 38 | … | 19 |
| 25 | 1 | 33.4 | 38 | 25 | 22 |
| 32 | 1 1/4 | 42.2 | 48 | 32 | 25 |
| 40 | 1 1/2 | 48.3 | 57 | 38 | 29 |
| 50 | 2 | 60.3 | 76 | 51 | 35 |
| 65 | 2 1/2 | 73.0 | 95 | 64 | 44 |
| 80 | 3 | 88.9 | 114 | 76 | 51 |
| 90 | 3 1/2 | 101.6 | 133 | 89 | 57 |
| 100 | 4 | 114.3 | 152 | 102 | 64 |
| 125 | 5 | 141.3 | 190 | 127 | 79 |
| 150 | 6 | 168.3 | 229 | 152 | 95 |
| 200 | 8 | 219.1 | 305 | 203 | 127 |
| 250 | 10 | 273.0 | 381 | 254 | 159 |
| 300 | 12 | 323.8 | 457 | 305 | 190 |
| 350 | 14 | 355.6 | 533 | 356 | 222 |
| 400 | 16 | 406.4 | 610 | 406 | 254 |
| 450 | 18 | 457.0 | 686 | 457 | 286 |
| 500 | 20 | 508.0 | 762 | 508 | 318 |
| 550 | 22 | 559.0 | 838 | 559 | 343 |
| 600 | 24 | 610.0 | 914 | 610 | 381 |
| 650 | 26 | 660.0 | 991 | 660 | 406 |
| 700 | 28 | 711.0 | 1067 | 711 | 438 |
| 750 | 30 | 762.0 | 1143 | 762 | 470 |
| 800 | 32 | 813.0 | 1219 | 813 | 502 |
| 850 | 34 | 864.0 | 1295 | 864 | 533 |
| 900 | 36 | 914.0 | 1372 | 914 | 565 |
| 950 | 38 | 965.0 | 1448 | 965 | 600 |
| 1000 | 40 | 1016.0 | 1524 | 1016 | 632 |
| 1050 | 42 | 1067.0 | 1600 | 1067 | 660 |
| 1100 | 44 | 1118.0 | 1676 | 1118 | 695 |
| 1150 | 46 | 1168.0 | 1753 | 1168 | 727 |
| 1200 | 48 | 1219.0 | 1829 | 1219 | 759 |
| 备注 1) 除此以外，还适用于 GB/T 10752、SH 3408、SH 3409、HG/T 21635、HG/T 21631、SY/T 0510、DL/T 695、EN 10253 等标准。 2) NPS 超过 48 的弯头应根据采购商和制造商商定的尺寸制造。 | |||||
