| 规格 | ASME SB366 | 年级 | UNS N06600 |
|---|---|---|---|
| 类型 | 布特韦尔德 | 时间安排 | SCH 10S 至 SCH XXS |
Buttweld ASME SB366 N06600 2.4816 Inconel 600 Con.Reducer B16.9
What Is UNS N06600 Pipe Fittings?
Nickel-based Inconel 600 is an alloy used for applications that necessitate corrosion and high temperature resistance. The primary constituents of Inconel 600 Fittings are both nickel and chromium， which imparts several good properties.
One of the most widely used alloys in the nuclear industry is Inconel 600. The reason why this alloy is popular across several industries amounts to many facts. Firstly， the Inconel 600 Pipe Fittings can operate at a wide temperature range. From a temperature as high as 2000° F to cryogenic temperatures. As the alloy contains about 70% nickel in its alloy， the ability to withstand high temperatures is something that is inherent in the Inconel 600 Fittings. The corrosion resistance properties of alloy 600 are widespread over several compounds and solutions.
Our Inconel 600 Pipe Fittings offers excellent performance in several critical environments. We are one of the top producers of different ASTM B366 UNS N06600 Inconel Alloy 600 Pipe Fittings in China， known for their accurate dimensions and durability.
Inconel 600 Equivalent Material
| 标准 | WERKSTOFF NR. | UNS | JIS | BS | 社会变革管理计划 | AFNOR | EN |
| 铬镍铁合金 600 | 2.4816 | N06600 | NCF 600 | NA 13 | МНЖМц 28-2，5-1，5 | NC15FE11M | 镍铬 15Fe |
Inconel 600 Chemical Analysis
| Ni + Co | Cr | 铁 | C | 锰 | S | Si | 铜 |
| 72.0 分钟 | 14.0-17.0 | 6.0-10.0 | .15 max | 最大 1.00 | 0.015 最大值 | 最大 0.50 | 最大 0.50 |
Inconel 600 Mechanical Properties
| 要素 | 密度 | 熔点 | 拉伸强度 | 屈服强度（0.2%Offset） | 伸长率 |
| 铬镍铁合金 600 | 8.47 克/立方厘米 | 1413°C (2580°F) | Psi - 95，000 ， MPa - 655 | Psi - 45，000 ， MPa - 310 | 40 % |
Inconel 600 Physical Properties
| 密度 | lb/in³ | 0.305 |
|---|---|---|
| Mg/m³ | 8.44 | |
| 比热 | Btu/lb°F (J/kg°C) | 0.106 |
| J/kg-°C | 444 | |
| 熔化范围 | °F | 2470-2575 |
| °C | 1354-1413 | |
| 电阻率 | ohm-circ mil/ft | 620 |
| μΩ-m | 1.03 | |
| 居里温度 | °F | -192 |
| °C | -124 | |
| Permeability | 200 oersted (15.9 kA/m) | 1.01 |
Nickel Alloy 600 Fittings Thickness Chart
NPS | OD | ASTM B366 Inconel 600 Cap | Nickel Alloy 600 Tee Fittings (Straight) | Inconel 600 Cross fittings (Straight) | Alloy 600 Stub End Fittings | |||
|---|---|---|---|---|---|---|---|---|
(毫米) | 英寸 | 长度 | 中心至终点 | 中心至终点 | Lap Diameter | Long Length | Short Length | |
1/2 | 21.3 | 0.840 | 1 | 1 | – | 1 3/8 | 3 | 2 |
3/4 | 26.7 | 1.050 | 1 | 1 1/8 | – | 1 11/16 | 3 | 2 |
1 | 33.4 | 1.315 | 1 1/2 | 1 1/2 | 1 1/2 | 2 | 4 | 2 |
1 1/4 | 42.2 | 1.660 | 1 1/2 | 1 7/8 | 1 7/8 | 2 1/2 | 4 | 2 |
1 1/2 | 48.3 | 1.900 | 1 1/2 | 2 1/4 | 2 1/4 | 2 7/8 | 4 | 2 |
2 | 60.3 | 2.375 | 1 1/2 | 2 1/2 | 2 1/2 | 3 5/8 | 6 | 2 1/2 |
2 1/2 | 73.0 | 2.875 | 1 1/2 | 3 | 3 | 4 1/8 | 6 | 2 1/2 |
3 | 88.9 | 3.500 | 2 | 3 3/8 | 3 3/8 | 5 | 6 | 2 1/2 |
3 1/2 | 101.6 | 4.000 | 2 1/2 | 3 3/4 | 3 3/4 | 5 1/2 | 6 | 3 |
4 | 114.3 | 4.500 | 2 1/2 | 4 1/8 | 4 1/8 | 6 3/16 | 6 | 3 |
5 | 141.3 | 5.563 | 3 | 4 7/8 | 4 7/8 | 7 5/16 | 8 | 3 |
6 | 168.3 | 6.625 | 3 1/2 | 5 5/8 | 5 5/8 | 8 1/2 | 8 | 3 1/2 |
8 | 219.1 | 8.625 | 4 | 7 | 7 | 10 5/8 | 8 | 4 |
10 | 273.1 | 10.750 | 5 | 8 1/2 | 8 1/2 | 12 3/4 | 10 | 5 |
12 | 323.9 | 12.750 | 6 | 10 | 10 | 15 | 10 | 6 |
Weight Chart of Inconel 600 Fittings
