| 类型 | WN SO Plate SW BL | 脸 | FF，RF ，RTJ |
|---|---|---|---|
| 压力： | Class150/300/600/9001500/2500 | 包装 | 合板木制托盘 |
B16.5 ASTM A105 A105N Carbon Steel Flange Class 150 #Class 300 ANSI 150 RF 6" So Flange SO WN Flange Oil and Gas
What is A105 flange?
ASTM A105 is the most generally utilized carbon steel material grade that used to manufacture forge piping components， for example， flange and forged fittings of small diameter piping. This carbon steel material grade is utilized for ambient and higher-temperature administration in pressure frameworks.
Carbon steel A105 flanges covers seamless forged carbon steel piping components for use in pressure systems at high-temperature service and ambient.Heat treatment is not a compulsory for asmesa 105 flange material except for above Class 300， flanges of special design where the design pressure or design temperature are not known and for items over 4” NPS and above Class 300.
A105 blind flange is forged between 1700°F to 2200°F， followed by quenching and tempering.
Carbon Steel A105 Forged Flange
| A105 Carbon Steel Flange Types | 尺寸 | |
| ASTM A105 Carbon Steel Slip-On Flanges | ASTM A105 Carbon Steel Weld Neck Flanges | 尺寸 1/2″ - 48″ Raised Face or Flat Face |
| ASTM A105 Carbon Steel Threaded Flanges | ASTM A105 Carbon Steel Socket Weld Flanges | |
| ASTM A105 Carbon Steel Plate Flanges | ASTM A105 Carbon Steel Reducing Flanges | |
| ASTM A105 Carbon Steel Lap Joint Flanges | ASTM A105 Carbon Steel Blind Flanges | |
| ASTM A105 Carbon Steel Square Flanges | ASTM A105 Carbon Steel Ring Type Joint Flanges | |
| ASTM A105 Carbon Steel Forged Flanges | ASTM A105 Carbon Steel Orifice Flanges | |
ASTM A105 Chemical Composition
| 要素 | Composition %， Note C |
|---|---|
| 碳 | 0.35 最大值 |
| 锰 | .60-1.05 |
| 磷 | .035 max |
| 硫磺 | 0.040 最大值 |
| 硅 | .10-35 |
| 铜 | .40 max， note A |
| 镍 | .40 max， note A |
| 铬 | .30 max， note A，B |
| 钼 | .12 max， note A，B |
| 钒 | .08 max， note A |
| Note A – The sum of copper， nickel， chromium， molybdenum and vanadium shall not exceed 1.00% Note B – The sum of chromium and molybdenum shall not exceed .32% Note C – for each reduction of 0.01% below the specified carbon maximum (.35%)， an increase of .06% manganese above the specified maximum (1.05%) will be permitted up to a maximum of 1.65% | |
ASTM A105 Mechanical properties
| 拉伸 | 70 ksi， min |
| Yield， note A | 36 ksi， min |
| Elongation in 2in， Basic minimum for wall 5/16″ and over， strip test | 30% |
| 硬度 | 187 HBW max |
| Note A – Determined by either the 0.2% offset method or the 0.5% extension-under-load method. Other test methods available as listed in A105. | |
A105 Flanges Applications:
- Carbon Steel Flanges uses in Oil and Gas Pipeline
- ASTM A105 Carbon Steel Pipe Flanges uses in Chemical Industry
- A105 Carbon Steel Flanges uses in Plumbing
- Carbon Steel ASTM A105N Flange uses in Heating
- ASTM A105 Plate Flanges uses in Water Supply Systems
- ASTM A105 Carbon Steel Forged Flanges uses in Power Plant
- Carbon A105N Flanges uses in Paper & Pulp Industry
- A105 Carbon Steel Flanges uses in General Purpose Applications
- ASME SA105 Carbon Steel Industrial Flanges uses in Fabrication Industry
- Carbon Steel Flanges uses in Food Processing Industry
- ANSI Carbon Steel A105N Flanges uses in Structural Pipe
