| 标准： | ASTM A270 ，3A，ISO11850 | 材料等级： | TP304/304L， TP316/316L |
|---|---|---|---|
| 包装 | 合板木制托盘 | 类型 | 焊接，无缝 |
| 强光 | astm a270 stainless steel sanitary tube， tp316l stainless steel sanitary tube， api Stainless Steel | ||
ASTM A270 TP316L Stainless Steel Seamless Tube /Sanitary Tube
ASTM A270 TP316L 卫生级不锈钢管通常指小管径，通常为 1/2 英寸至 2 1/2"，厚度为 0.049 英寸（1.24 毫米）至 0.15 英寸（3.81 毫米）。ASTM A270 TP316L 卡套管的最大外径为 12 英寸（316L.8 毫米）。ASTM A270 TP316L 卡套管使用英寸磅作为标准计量单位。ASTM A270 TP316L 卡套管的壁厚公差不得超过 12.5%。
ASTM A270 TP316L STAINLESS STEEL SANITARY TUBE SPECIFICATION
ASTM A270 TP316L Sanitary Tubing Type | 无缝和焊接奥氏体和铁素体/奥氏体不锈钢卫生管材 |
| ASTM A270 TP316L Sanitary Tube OD. | 1/2” |
| ASTM A270 TP316L Sanitary Tube Wall | 16 号（0.065 英寸） |
| ASTM A270 TP316L Sanitary Tube Length | 20′ |
| ASTM A270 TP316L Sanitary Tube OD Tolerance | +/-0.005 英寸 / +/-0.13 毫米 |
| ASTM A270 TP316L Sanitary Tube WT Tolerance | +/-10% |
| ASTM A270 TP316L Sanitary Tube Length Tolerance | +1/8" / +3.18mm |
| ASTM A270 TP316L Sanitary Tube Material | 不锈钢 304，不锈钢 304L，不锈钢 316，不锈钢 316L |
| ASTM A270 TP316L Sanitary Tubing Standard | 3A / ASTM A270 / A270M |
| ASTM A270 TP316L Sanitary Tubing Finish | 2B 磨光，4 号磨光，BA 磨光，400 粗细度磨光，550 粗细度磨光，600 粗细度磨光 |
| ASTM A270 TP316L Sanitary Tubing Polish | 机械抛光 |
| ASTM A270 TP316L Sanitary Tubing Type | 无缝 |
| ASTM A270 TP316L Sanitary Tubing Certification | 3A - 食品/乳品级 |
| ASTM A270 TP316L Sanitary Tubing Mill Test Certificate | EN10204 3.1 |
| ASTM A270 TP316L Product | ASTM A270 316L Sanitary Tubing， ASTM A270 SS316L Seamless Sanitary Tubes， ASTM A270 Type 316L Tubing， ASTM A270 TP316L Welded Sanitary Tubing， ASTM A270 316L Welded Sanitary Tubes， ASTM A270 TP316L Stainless Steel Sanitary Tubing |
| ASTM A270 TP316L Sanitary Tubing Packing | 套管，端盖，木箱 |
ASTM A270 TP316L 卫生级不锈钢管在制造过程中应注意以下几点：
1) ASTM A270 TP316L Seamless steel pipe should not contains any kind of welding processing.
2) ASTM A270 TP316L 焊接钢管适用于自动焊接加工，但不得使用金属材料作为填充物。
3) ASTM A270 TP316L 高冷加工（HCW）管应在最终退火前通过冷加工将管壁和焊缝的厚度减薄不少于 35%，制成焊管。应注意在焊接过程中添加填充材料。焊缝应按照 ASME 锅炉和压力容器标准规范进行 100% 射线图形检查。
4) ASTM A270 TP316L 卫生管可根据制造商的要求提供热加工或冷加工。
Hot-treatment methods for ASTM A270 TP316L stainless tube
All materials should supply after hot-treatment. Except the for duplex stainless steel materials S31803， S32003， S320205， S32750， N08926 and N08367， in these cases it shall consist of heating the material to a minimum temperature of 1900 ℉ (1040 ℃) and quenching in water or rapid cooling by other means.
ASTM A270 TP316L Sanitary Tubing Surface Requirements
Surface of rolled products: No need extra polishing or smooth treatment.
Mechanical polished surface: Purchasers according the same numbering abrasive (grinding stuff) to polish the products get the required products’ surface.
Electrolytic polishing of the surface: Before this processing， manufacturer could use other ways to polish products.
The maximum average of roughness: Customers could specify the maximum roughness of internal surface， external surface and both surface.
Normally surface treatment: Internal， External， SF4， SF3， etc.
