| Standard: | ASTM B363; ASME SB363 | Material: | Grade 2 |
|---|---|---|---|
| Type: | Titanium Alloy Steel Buttweld Elbow | Degree: | 45/90/180 |
| Radius: | Long Radius/Short Radius | Sizes: | 1/2”-48”(DN15-DN1200) Or Custom Size |
| Thickness: | SCH10S-XXS | Surface: | Sand Blasting |
TITANIUM ALLOY/UNALLOYED TITANIUM STEEL BUTTWELD FITTING ASTM B363 WPT2 ELBOW BEND
Overview:
Titanium grade 2 elbow is a type of pipe fitting that is made from commercial pure titanium， also known as Grade 2 titanium. Grade 2 titanium is widely used due to its excellent corrosion resistance， good formability， and weldability. It contains a small amount of palladium， which enhances its corrosion resistance.
An elbow， in the context of pipe fittings， is a device that changes the direction of the flow in a piping system. It is typically used to connect two pipes of different diameters or to change the direction of fluid flow in a piping system.
When it comes to applications， titanium grade 2 elbows are commonly used in industries where corrosion resistance and strength-to-weight ratio are critical factors， such as chemical processing， marine environments， aerospace， medical implants， and more.
The specific design， dimensions， and specifications of a titanium grade 2 elbow can vary based on the intended application and industry standards. It's essential to ensure that the elbow meets the required standards and specifications for the specific application.
Overall， titanium grade 2 elbows are valued for their corrosion resistance， lightweight nature， and strength， making them a valuable component in various industrial and commercial applications.
Specification:
| Standard | ASTM B363 & Its equivalent ASME， DIN & EN Standard. |
| Grades | Grade 2 |
| Size | 1/2''-48'' or custom size |
| Wall Thickness | SCH10S to SCH.XXS |
| Radius | SR LR |
| End | Beveled End |
| Surface | Sand Blasting |
| Packing | Plywood case/Pallet |
Chemical Composition:
| Grade | C | O | N | H | Fe | Other Elements each | Other Elements total |
| WPT2 | 0.08 max | 0.25 max | 0.03 max | 0.015 max | 0.3 max | 0.1 max | 0.4 max |
Mechanical Properties:
| Grade | Tensile Strength min， ksi (MPa) | Yield Strength min， ksi (MPa) | Elongation in 2 in. or 50mm， min (%) |
| WPT2 | 50(345) | 40(275)-65(450) | 20 |
Dimension:
| Nominal Size | Outside Diameter at Bevel (mm) | Center to End (mm) | |||
| 90° Elbow | 45° Elbow | ||||
| DN | NPS | O.D. | A | B | |
| LR | SR | LR | |||
| 15 | 1/2 | 21.3 | 38 | … | 16 |
| 20 | 3/4 | 26.7 | 38 | … | 19 |
| 25 | 1 | 33.4 | 38 | 25 | 22 |
| 32 | 1 1/4 | 42.2 | 48 | 32 | 25 |
| 40 | 1 1/2 | 48.3 | 57 | 38 | 29 |
| 50 | 2 | 60.3 | 76 | 51 | 35 |
| 65 | 2 1/2 | 73.0 | 95 | 64 | 44 |
| 80 | 3 | 88.9 | 114 | 76 | 51 |
| 90 | 3 1/2 | 101.6 | 133 | 89 | 57 |
| 100 | 4 | 114.3 | 152 | 102 | 64 |
| 125 | 5 | 141.3 | 190 | 127 | 79 |
| 150 | 6 | 168.3 | 229 | 152 | 95 |
| 200 | 8 | 219.1 | 305 | 203 | 127 |
| 250 | 10 | 273.0 | 381 | 254 | 159 |
| 300 | 12 | 323.8 | 457 | 305 | 190 |
| 350 | 14 | 355.6 | 533 | 356 | 222 |
| 400 | 16 | 406.4 | 610 | 406 | 254 |
| 450 | 18 | 457.0 | 686 | 457 | 286 |
| 500 | 20 | 508.0 | 762 | 508 | 318 |
| 550 | 22 | 559.0 | 838 | 559 | 343 |
| 600 | 24 | 610.0 | 914 | 610 | 381 |
| 650 | 26 | 660.0 | 991 | 660 | 406 |
| 700 | 28 | 711.0 | 1067 | 711 | 438 |
| 750 | 30 | 762.0 | 1143 | 762 | 470 |
| 800 | 32 | 813.0 | 1219 | 813 | 502 |
| 850 | 34 | 864.0 | 1295 | 864 | 533 |
| 900 | 36 | 914.0 | 1372 | 914 | 565 |
| 950 | 38 | 965.0 | 1448 | 965 | 600 |
| 1000 | 40 | 1016.0 | 1524 | 1016 | 632 |
| 1050 | 42 | 1067.0 | 1600 | 1067 | 660 |
| 1100 | 44 | 1118.0 | 1676 | 1118 | 695 |
| 1150 | 46 | 1168.0 | 1753 | 1168 | 727 |
| 1200 | 48 | 1219.0 | 1829 | 1219 | 759 |
| Notes: 1) Besides these， GB/T 10752， SH 3408， SH 3409， HG/T 21635， HG/T 21631， SY/T 0510， DL/T 695， EN 10253 etc.are also applied. 2) The elbow with NPS over 48 shall be made subject to the sizes agreed by purchaser and manufacturer. | |||||
