| Specification: | ASTM A269， ASME SA269 | Grade: | TP304 |
|---|---|---|---|
| Application: | Marine & Offshore， Oil And Gas，boiler，heat Exchanger，handrail | Standard: | JIS， AiSi， ASTM， GB， DIN， EN |
| Non Destructive Test: | Eddy Current Test -ASTM E426， Hystostatic Test-ASTM A999， Ultrsonic Test -ASTM E213 | Technique: | Cold Rolled Hot Rolled |
| High Light: | 1.4301 Stainless Steel Seamless Tube， Oil Gas Stainless Steel Seamless Tube， Seamless Stainless Steel Pipe Cold Rolled | ||
Stainless Steel Seamless Tube ASTM A269 TP304 1.4301 Oil and Gas
The ASTM A269 TP304 is an austenitic grade of steel that covers standard seamless and welded configurations. The ASTM A269 TP304 Tube is designed with a superior composition of nickel and chromium with other constituting alloys， giving these tubes enhanced resistance against corrosive and oxidative media.
ASTM A269 Tp304 Stainless Steel Tubing has a density of 8 g/cm³ with a melting point of 1400 degrees C. These tubes has excellent mechanical properties and can work well in different pressures and temperatures.
The maintenance methods of TP304 Stainless Steel:
①TP304 Stainless Steels should be stored in a clean and ventilated environment， and the outer packaging should not be opened at will during storage.
②Be careful when adding padding paper. If the outer packaging of TP304 Stainless Steel is accidentally soaked， the padding paper should be removed immediately to prevent rust.
③TP304 Stainless Steels should be protected from direct light and should be replaced in time if the film deteriorates.
④When storing TP304 Stainless Steels， attention should be paid to moisture， oil， lubricants， etc. to avoid causing rust in the long term.
Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | |
| TP304 | min. | – | – | – | – | – | 18.0 | – | 8.0 | – |
| max. | 0.08 | 2.0 | 0.75 | 0.045 | 0.030 | 20.0 | 10.5 | 0.10 | ||
Tolerance Of ASTM A269 TP304 Tube
Size Inches | Tolerances， Inches | |||
OD， Inches | Wall | Ovality 2 x Tol.， In. | Cut Length (b)， In. | |
Less than 1/2 | ±0.005 | ±15% | —— | +1/8 –0 |
Over 1/2 to 1-1/2 | ±0.005 | ±10% | –0.065 | |
Over 1-1/2 to 3-1/2 | ±0.010 | ±10% | –0.095 | +3/16 –0 |
Over 3-1/2 to 5-1/2 | ±0.015 | ±10% | –0.150 | |
Over 5-1/2 to 8 | ±0.030 | ±10% | —— | |
TP304 Mechanical Properties
| Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
| Rockwell B (HR B) max | Brinell (HB) max | ||||
| TP304 | 515 | 205 | 40 | 92 | 201 |
Physical Properties
Grade | Density (kg/m3) | Elastic Modulus (GPa) | Mean Coefficient of Thermal Expansion (m/m/0C) | Thermal Conductivity (W/m.K) | Specific Heat 0-1000C (J/kg.K) | Electrical Resistivity (n.m) | |||
|---|---|---|---|---|---|---|---|---|---|
0-1000C | 0-3150C | 0-5380C | at 1000C | at 5000C | |||||
304/L/H | 8000 | 193 | 17.2 | 17.8 | 18.4 | 16.2 | 21.5 | 500 | 720 |
Equivalent Material For 304 Grade
| Grade | UNS No | Old British | Euronorm | Swedish SS | Japanese JIS | ||
| BS | En | No | Name | ||||
| 304 | S30400 | 304S31 | 58E | 1.4301 | X5CrNi18-10 | 2332 | SUS 304 |
Applications
-Food processing equipment， particularly in beer brewing， milk processing & wine making.
-Kitchen benches， sinks， troughs， equipment and appliances
-Architectural panelling， railings & trim
-Chemical containers， including for transport
-Heat Exchangers
-Woven or welded screens for mining， quarrying & water filtration
-Threaded fasteners
-Springs
Package
