| Specification: | ASTM B167 | Grade: | Inconel 601 / N06601 |
|---|---|---|---|
| Type: | Seamless | Surface: | Pickled And Annealed， Polished， Bright Annealed |
| Non Destructive Test: | ET， HT， UT | Size Standard: | ASTM B16.10 & B16.19 & Customized |
| High Light: | N06601 Seamless Nickel Alloy Pipe， Cold Worked Nickel Alloy Pipe， ASTM B167 Nickel Alloy Tube | ||
ASTM B167 Inconel 601 N06601 Nickel Alloy Seamless Pipe Cold Worked
What is Inconel 601?
Inconel 601 is a nickel-chromium alloy used for applications that require resistance to corrosion and heat. This nickel alloy stands out due to its resistance to high temperature oxidation， remaining highly resistant to oxidation through 2200° F. Alloy 601 develops a tightly adherent oxide scale which resists spalling even under conditions of severe thermal cycling.
This nickel alloy has good high temperature strength， and retains its ductility after long service exposure. It has good resistance to aqueous corrosion， high mechanical strength， and is readily formed， machined and welded.
Inconel 601’s properties make it a material of broad utility in fields like thermal processing， chemical processing， pollution control， aerospace， and power generation. However， alloy 601 is not suggested for use in strongly reducing， sulfur bearing environments.
Processability of Inconel 601 (Alloy 601/UNS N06601)
Inconel 601 (UNS N06601) nickel base alloy is easy to hot work. The heating temperature is 1150 ~ 1200 ℃， and the hot working temperature is 1050 ~ 1200 ℃. The simple processing can be carried out below 850 ℃. Cracking will occur in the temperature range of 650 ~ 850 ℃， please avoid this temperature range for processing.
In order to avoid carbide precipitation， it is suggested to increase the cooling rate in the range of 500 ~ 800 ℃. 601 alloy has excellent cold workability and can be processed as SUS 310S and alloy800.
Chemical Compostion of Inconel 601
| Ni | Cr | Al | C | Mn | Si | Fe |
|---|---|---|---|---|---|---|
| 61.5 | 22.5 | 1.4 | .05 | .3 | .2 | 14 |
Mechanical Properties of Inconel 601
| Tensile (psi) | .2% Yield (psi) | Elongation (%) |
|---|---|---|
| 80，000 | 30，000 | 35 |
Physical Properties of Inconel 601
| Density | Melting Range | Specific Heat | Curie Temperature | ||||
| lb/inch3 | Mg/m3 | °F | °C | Btu/lb-°F | J/kg-°C | °F | °C |
| 0.293 | 8.11 | 2480-2571 | 1360-1411 | 0.107 | 448 | <-320 | <-196 |
*The mechanical properties of Inconel 601 may vary in different product forms or heat treatment conditions.
Equivalent Material of Inconel 601
| Grade | Euronorm | Old British | GOST | UNS No | Japanese JIS | ||
| AFNOR | No | En | BS | ||||
| Inconel 601 | NC23FeA | 2.4851 | NiCr23Fe | NA 49 | XH60BT | N06601 | NCF 601 |
Applications:
-Exhaust system components
-Piping system
-The solid waste incinerator combustion chamber
-Pipe supports and ash handling part
-Exhaust detoxification system components
-Oxygen to the heater
-Heat exchange tubes
