| Name: | Stainless Steel Y-TEE | Material: | S31803(SUPER DUPLEX) |
|---|---|---|---|
| Type: | Butt Weld | Standard: | ASTM，AISI |
| Certification: | ISO & SGS | Shape: | Y Shape |
| High Light: | Stainless Steel Y Type Tee， Butt Weld Y Type Tee， Y Shape Steel Pipe Tee A815 | ||
ASTM A815 S31803 Y-SHAPE TEE STAINLESS STEEL BUTT WELD FITTING B16.9
Y Type tee is a pipe fitting which can be produced in Butt Weld & Forged technique as per ASME B16.9 & ANSI B16.11. It is similar to a tee but has a side opening outlet branch at a 45 degree angle. We also call it from other names such as Y Tee Fitting， Y Shaped Tee， Y Cross Tee， Double Y Tee，Y Lateral Tee， Y Tee Pipe Branch Fitting etc. We at Neelcon can produce these Y Type Tee Pipe Fitting in Stainless Steel， Alloy Steel， Carbon Steel， Copper & Nickel Alloy Material.
Duplex stainless steel A815 UNS S31803 are extremely corrosion resistant， work hardenable alloys. Their microstructures consist of a mixture of austenite and ferrite phases. As a result， duplex stainless steels display properties characteristic of both austenitic and ferritic stainless steels. This combination of properties can mean some compromise when compared with pure austenitic and pure ferritic grades.
Duplex stainless steels A815 UNS S31803 are in most cases， tougher than ferritic stainless steels. Strengths of duplex stainless steels can in some cases be double that for austenitic stainless steels.
DIMENSIONAL TOLERANCES STRAIGHT TEE ASME B16.9
| Nominal Pipe Size | 1/2 to 2.1/2 | 3 to 3.1/2 | 4 | 5 to 8 | 10 to 18 | 20 to 24 | 26 to 30 | 32 to 48 |
| Outside Dia at Bevel (D) | +1.6 -0.8 | 1.6 | 1.6 | +2.4 -1.6 | +4 -3.2 | +6.4 -4.8 | +6.4 -4.8 | +6.4 -4.8 |
| Inside Dia at End | 0.8 | 1.6 | 1.6 | 1.6 | 3.2 | 4.8 | +6.4 -4.8 | +6.4 -4.8 |
| Center to End (C / M) | 2 | 2 | 2 | 2 | 2 | 2 | 3 | 5 |
| Wall Thickness | Not less than 87.5% of Nominal Wall Thickness | |||||||
Dimensional tolerances are in millimeters unless otherwise indicated and are equal ± except as noted.
| Special alloy | Inconel 600， Inconel 625， Inconel 718， Inconel X750， Incoloy 800， |
| Incoloy 800H， Incoloy 825， Hastelloy C276， Monel 400， Monel K500 | |
| WPS 31254 S32750， UNS S32760 | |
| Stainless steel | ASTM A403 WP304/304L， WP316/316L， WP321， WP347， WPS 31254 |
| Duplex& super duplex stainless steel | ASTM A 815 UNS S31803， UNS S32750， UNS S32760 |
A815 UNS S31803 Chemical Composition
| Chemical Element | % Present |
|---|---|
| Carbon (C) | 0.0 – 0.03 |
| Chromium (Cr) | 21.00 – 23.00 |
| Manganese (Mn) | 2.00 max |
| Silicon (Si) | 1.00 max |
| Phosphorous (P) | 0.0 – 0.03 |
| Sulphur (S) | 0.0 – 0.02 |
| Nickel (Ni) | 4.50 – 6.50 |
| Nitrogen (N) | 0.08 – 0.20 |
| Molybdenum (Mo) | 2.50 – 3.50 |
| Iron (Fe) | Balance |
