| Standard: | ASTM A403/ASME SA403 | Material: | WP304L |
|---|---|---|---|
| Type: | Stainless Steel Buttweld Elbow | Degree: | 45/90/180 |
| Radius: | Long Radius/Short Radius | Sizes: | 1/2”-48”(DN15-DN1200) Or Custom Size |
| Thickness: | SCH10S-XXS | Surface: | Sand Blasting |
| High Light: | carbon steel fittings， forged steel fittings | ||
ASTM A403 WP304L-S 90° 45° 180° ELBOW SR/LR STAINLESS STEEL BUTT WELD FITTING
Overview:
WP304L Elbow is a type of pipe fitting that is made from grade 304L stainless steel. It is designed to connect two or more sections of piping systems and change the direction of flow. The "WP" prefix stands for "wrought pipe" and indicates that the elbow is made from a rather than a welded one.
The grade 304L stainless steel used to manufacture WP304L Elbows is a low-carbon variant of 304 stainless steel， which makes it more resistant to sensitization during welding. This type of elbow is commonly used in a range of industries such as chemical processing， food and beverage， oil and gas， and pharmaceuticals.
WP304L Elbows are available in a range of sizes and are available in different degrees of bends， including 90-degree， 45-degree， and 180-degree bends among others. These fittings are also commonly available in other standards such as ANSI， DIN， and JIS.
Specification:
| Standard | ASTM A403 & Its equivalent ASME， DIN & EN Standard. |
| Grades | WP304L |
| Size | 1/2''-48'' or custom size |
| Wall Thickness | SCH10S to SCH.XXS |
| Radius | SR LR |
| End | Beveled End |
| Surface | Sand Blasting |
| Packing | Plywood case/Pallet |
Chemical Composition:
| Grade | UNS | C | Mn | P | S | Si | Ni | Cr |
| WP304L | S30403 | 0.30 max | 2.00 max | 0.045 max | 0.03 max | 1.00 max | 8.0-12.0 | 18.0-20.0 |
Mechanical Properties:
| Grade | UNS | Tensile Strength， min， ksi (MPa) | Yield Strength， min， ksi (MPa) | Elongation in 2 in. or 50mm， min (%) |
| WP304L | S34709 | 75(515) | 30(205) | 28 |
Dimension:
| Nominal Size | Outside Diameter at Bevel (mm) | Center to End (mm) | |||
| 90° Elbow | 45° Elbow | ||||
| DN | NPS | O.D. | A | B | |
| LR | SR | LR | |||
| 15 | 1/2 | 21.3 | 38 | … | 16 |
| 20 | 3/4 | 26.7 | 38 | … | 19 |
| 25 | 1 | 33.4 | 38 | 25 | 22 |
| 32 | 1 1/4 | 42.2 | 48 | 32 | 25 |
| 40 | 1 1/2 | 48.3 | 57 | 38 | 29 |
| 50 | 2 | 60.3 | 76 | 51 | 35 |
| 65 | 2 1/2 | 73.0 | 95 | 64 | 44 |
| 80 | 3 | 88.9 | 114 | 76 | 51 |
| 90 | 3 1/2 | 101.6 | 133 | 89 | 57 |
| 100 | 4 | 114.3 | 152 | 102 | 64 |
| 125 | 5 | 141.3 | 190 | 127 | 79 |
| 150 | 6 | 168.3 | 229 | 152 | 95 |
| 200 | 8 | 219.1 | 305 | 203 | 127 |
| 250 | 10 | 273.0 | 381 | 254 | 159 |
| 300 | 12 | 323.8 | 457 | 305 | 190 |
| 350 | 14 | 355.6 | 533 | 356 | 222 |
| 400 | 16 | 406.4 | 610 | 406 | 254 |
| 450 | 18 | 457.0 | 686 | 457 | 286 |
| 500 | 20 | 508.0 | 762 | 508 | 318 |
| 550 | 22 | 559.0 | 838 | 559 | 343 |
| 600 | 24 | 610.0 | 914 | 610 | 381 |
| 650 | 26 | 660.0 | 991 | 660 | 406 |
| 700 | 28 | 711.0 | 1067 | 711 | 438 |
| 750 | 30 | 762.0 | 1143 | 762 | 470 |
| 800 | 32 | 813.0 | 1219 | 813 | 502 |
| 850 | 34 | 864.0 | 1295 | 864 | 533 |
| 900 | 36 | 914.0 | 1372 | 914 | 565 |
| 950 | 38 | 965.0 | 1448 | 965 | 600 |
| 1000 | 40 | 1016.0 | 1524 | 1016 | 632 |
| 1050 | 42 | 1067.0 | 1600 | 1067 | 660 |
| 1100 | 44 | 1118.0 | 1676 | 1118 | 695 |
| 1150 | 46 | 1168.0 | 1753 | 1168 | 727 |
| 1200 | 48 | 1219.0 | 1829 | 1219 | 759 |
| Notes: 1) Besides these， GB/T 10752， SH 3408， SH 3409， HG/T 21635， HG/T 21631， SY/T 0510， DL/T 695， EN 10253 etc.are also applied. 2) The elbow with NPS over 48 shall be made subject to the sizes agreed by purchaser and manufacturer. | |||||
