| NDT: | Eddy Current Test ， Hydrostatic Test ， Ultrasonic Test | Material: | TP304，TP304L，TP304H， TP304N |
|---|---|---|---|
| Standard: | ASTM A213， ASME SA213 | Surface: | Annealed， Polished Etc |
| Price: | Negoicable | Quantity: | 100KGS |
| High Light: | TP304 SS Heat Exchanger Pipe， Length 6096mm Heat Exchanger Pipe， ASTM A213 TP304 Heat Exchanger Tube | ||
ASTM A213 TP304 19.05*2.11*6096MM (Min Wall Thickness) for Heat exchanger
Specification:
ASME SA213/A213: Standard Specification for Seamless Ferritic and Austenitic Alloy-
Steel Boiler， Superheater and Stainless Steel Heat Exchanger Tubes.
Other Standard:DIN 17456 ， DIN 17458， EN10216-5， GOST 9940-81， GOST 9941-81， JIS-G3463，…
Material Grade:
| American Standard | Austenitic Steel: TP304，TP304L，TP304H， TP304N， TP310S，TP316，TP316L，TP316Ti，TP316H， TP317，TP317L， TP321， TP321H，TP347， TP347H，904L… Duplex Steel : S32101，S32205，S31803，S32304，S32750， S32760 Others:TP405，TP409， TP410， TP430， TP439，… |
| Europen Standard | 1.4301，1.4307，1.4948，1.4541，1.4878，1.4550，1.4401，1.4404，1.4571，1.4438， 1.4841，1.4845，1.4539，1.4162， 1.4462， 1.4362， 1.4410， 1.4501 |
| GOST | 08Х17Т，08Х13，12Х13，12Х17，15Х25Т，04Х18Н10，08Х20Н14С2， 08Х18Н12Б，10Х17Н13М2Т，10Х23Н18，08Х18Н10，08Х18Н10Т， 08Х18Н12Т，08Х17Н15М3Т，12Х18Н10Т，12Х18Н12Т，12Х18Н9， 17Х18Н9， 08Х22Н6Т， 06ХН28МДТ |
Size Range:
| Production | Outside Diameter | Wall Thickness |
| Heat Exchanger Tube | 6.00mm to 101.6mm | 0.5mm to 8mm |
Final Finishing
Solution Annealed & Pickled/Bright Annealed.
Type of Tubes:
U-bend & Straight.
Some of the quality tests carried out by us includes:
| Corrosion Test | Conducted only when specially requested by the client |
| Chemical Analysis | Test done as per required quality standards |
| Destructive / Mechanical Testing | Tensile | Hardness | Flattening | Flare | Flange |
| Reverse-bend and Re. flat tests | Carried out in full compliance with relevant standards & ASTM A-450 and A-530 norms， which ensures trouble-free expansion， welding & use at customers end |
| Eddy Current Testing | Done to detect homogeneities in subsurface by using Digital Flaw-mark Testing System |
| Hydrostatic Testing | 100% Hydrostatic Testing carried out according to ASTM-A 450 norms for checking tube leakage， and biggest pressure we can support 20Mpa/7s . |
| Air Under Pressure Test | To check any evidence of air leakage |
| Visual Inspection | After passivation， every single length of tubes & pipes is subjected to thorough visual inspection by trained staff for detecting surface flaws & other imperfections |
Supplementary Testing : Apart from the above mentioned tests， we also carry out on the manufactured products supplementary testing. The tests conducted under this include:
|
|
|
A312 TP304 Chemical Composition
| SS GRADE | 304 | 304N | 304LN |
| Ni | 8 – 11 | 8 – 11 | 8 – 11 |
| Fe | Balance | ||
| Cr | 18 – 20 | 18 – 20 | 18 – 20 |
| C | 0.08 max | 0.08 max | 0.035 max |
| Si | 0.75 max | 0.75 max | 0.75 max |
| Mn | 2 max | 2 max | 2 max |
| P | 0.040 max | 0.040 max | 0.040 max |
| S | 0.030 max | 0.030 max | 0.030 max |
| N | 0.10 – 0.16 | 0.10 – 0.16 | |
