| Specification: | ASTM A106， ASME SA106 | Grade: | GR.B |
|---|---|---|---|
| Type: | Seamless | Non Destructive Test: | Eddy Current Test -ASTM E426， Hystostatic Test-ASTM A999， Ultrsonic Test -ASTM E213 |
| High Light: | High Temperature Carbon Steel， ASTM A106 Carbon Steel Tube， Grade B Carbon Steel | ||
ASTM A106 GR.B Carbon Steel High Temperature Service
ASTM A106 Grade B Pipe is a specification and grade for high temperature， high pressure carbon steel pipes.
This specification covers seamless carbon steel pipe for high-temperature service (Note 1) in NPS 1⁄8 to NPS 48 [DN 6 to DN 1200] (Note 2) inclusive， with nominal (average) wall thickness as given in ASME B36.10M.
It shall be permissible to furnish pipe having other dimensions provided such pipe complies with all other requirements of this specification.
Pipe ordered under this specification shall be suitable for bending， flanging， and similar forming operations， and for welding. When the steel is to be welded， it is presupposed that a welding procedure suitable to the grade of steel and intended use or service will be utilized.
TONG CHUANG Group is a supplier of these pipes in different sizes and quantities. There are different standards and grades that are used in different applications. The A106 Grade B is used in applications where hot gases and fluids are transported at elevated temperatures. This is important to keep the energy consumption down at these plants. There are different pressure classes denoted by the schedules of these pipes.
Chemical Composition:
| Grade B | |
| Carbon max. % | 0.30 |
| Manganese % | 0.29 to 1.06 |
| Phosphorous， max. % | 0.035 |
| Sulfur， max. % | 0.035 |
| Silicon， min.% | 0.10 |
| Chrome， max. % | 0.40 |
| Copper， max. % | 0.40 |
| Molybdenum， max. % | 0.15 |
| Nickel， max. % | 0.40 |
| Vanadium， min.% | 0.08 |
Equivalent Material:
| Former | New | |||
|---|---|---|---|---|
| Execution | Standard | Material | Standard | Material |
| Seamless | ASTM A106 | GRADE B | EN 10216-2 | P265GH |
ASTM A106 Gr B Pipe Weight Chart Diameter
| NPS [DN Designator] | Over | Under | ||
|---|---|---|---|---|
| in. | mm | in. | mm | |
| 1/8 to 1-1/2 [6 to 40]， incl | 1/64 (0.015) | 0.4 | 1/64 (0.015) | 0.4 |
| Over 1-1/2 to 4 [40 to 100]， incl | 1/32 (0.031) | 0.8 | 1/32 (0.031) | 0.8 |
| Over 4 to 8 [100 to 200]， incl | 1/16 (0.062) | 1.6 | 1/32 (0.031) | 0.8 |
| Over 8 to 18 [200 to 450]， incl | 3/32 (0.093) | 2.4 | 1/32 (0.031) | 0.8 |
| Over 18 to 26 [450 to 650]， incl | 1/8 (0.125) | 3.2 | 1/32 (0.031) | 0.8 |
| Over 26 to 34 [650 to 859]， incl | 5/32 (0.156) | 4.0 | 1/32 (0.031) | 0.8 |
| Over 34 to 48 [850 to 1200]， incl | 3/16 (0.187) | 4.8 | 1/32 (0.031) | 0.8 |
Tensile Requirements:
| Grade B | |
| Tensile Strength， min.， psi | 60，000 |
| Yield Strength， min.， psi | 35，000 |
Applications:
-Petrochemical Industry
-Chemical Industry
-Oil and Gas Industry
-Pulp & Paper Indusry
-Power Plant Industry
-Food Processing Industry
-Pharmaceuticals Industry
-Energy Industry
-Aerospace Industry
FAQ:
Q1: What is the difference between specification A106 and SA106?
A: There is no difference between A106 and SA106.
SA106 is a grade of American ASME， and A106 is the grade of ASTM.
Q2: What does the mark CD in the steel pipe SA106Gr.B standard mean?
A: CD means cold drawn，SA106 stipulates that pipes below DN40 can be hot-rolled or cold-drawn; pipes above DN50 are conventionally hot-rolled. When the manufacturer and the purchaser reach an agreement， cold-drawn manufacturing is allowed.
Q3: What is the difference between ASME SA-106 and ASME SA-106M?
A: The difference between ASME SA-106 and ASME SA-106M is that if the size standard is imperial， use ASME SA-106， if the size standard is metric， use ASME SA-106M.
