| Specification: | ASTM A268 TP430 Ferritic Stainless Steels | Technique: | Cold Drawn |
|---|---|---|---|
| Shape: | Round | Length: | 6 Meters Or Customized |
| Finish: | Pickled | Heat Treatment: | Annealed，pickled Surface |
| Certification: | ISO，SGS，BV，ISO & SGS，ISO/CE/SGS | Application: | Power Plant，Hydraulic，energy And Environmental Protection |
| High Light: | Power Plant Stainless Steel Tube， Ferritic Stainless Steel Tube， A268 TP430 Stainless Steel Tube | ||
ASME SA268 ASTM A268 TP430 Stainless Steel Seamless Tube For Power Plant
We are one of the largest manufacturers of stainless steel， duplex and alloy steel pipes in China. After more than 20 years of development， we have accumulated a large number of customers all over the world， and TONG CHUANG products have won the praise of our customers.
ASTM A268 is a standard specification for seamless and welded tubes and pipes of ferritic and martensitic stainless steels for general purposes， in grades TP410， TP405， TP420， TP430， TP430Ti， TP403， TP409， TP444， TP439， and TP446， and ASME SA268 is an alternative standard covering a range of nominal thickness grades of ferritic and martensitic stainless steels. grades of ferritic and martensitic stainless steel welded steel tubing for general corrosion resistance and high temperature environments.
Tubing must be seamless or welded with no filler metals added; tubing must be reheated to 1200.F [650.C] or higher and then cooled to meet the requirements of this specification; and all tubing must be free of excessive scale and suitable for inspection. A small amount of oxidation will not be considered scale.
Chemical Composition
| Grade: | TP410 | TP430 | TP439 |
| UNS | S41000 | S43000 | S43035 |
| C， Max | 0.15 | 0.12 | 0.07 |
| Mn，Max | 1 | 1 | 1 |
| P， Max | 0.04 | 0.04 | 0.04 |
| S， Max | 0.03 | 0.03 | 0.03 |
| Si， Max | 1 | 1 | 1 |
| Ni | … | … | 0.50max |
| Cr | 11.5-13.5 | 16.0-18.0 | 17.00-19.00 |
| Mo | … | … | … |
| Al | … | … | 0.15 |
| Cu | … | … | … |
| N | … | … | 0.04 |
| Ti | … | … | 0.20+4(C+N)Min， 1.10max |
Mechanical Properties
| Grade | Tensile Strength， Min， Ksi [MPa] | Yield Strength， Min， Ksi [MPa] | ELONGATION. MIN， % |
| TP410 | 55 [380] | 30 [205] | 20 |
| TP430 | 60 [415] | 35 [240] | 20 |
| TP439 | 60 [415] | 30 [205] | 20 |
Physical Properties
| Density， g/cm3 (lb/in.3) | 7.8 (0.28) |
| Melting point， °C (°F) | 1425-1510 (2600-2750) |
| Specific heat capacity， J/kg · K (Btu/lb · °F) | 460 (0.11) at 0-100 °C (32 to 212 °F) |
| Electrical resistivity， μΩ·m | 0.60 at 20 ℃ |
| 430 stainless steel magnetic permeability | 600-1100 (Approximate) |
| Elastic modulus (Modulus of elasticity)， GPa (106 psi) | 200 (29.0) |
| Thermal diffusivity， mm2/s | 7.3 |
| Thermal conductivity， W/m · K (Btu/ft · h · °F) | 26.1 (15.1)， at 100 ℃ (212 °F) |
| 26.3 (15.2)， at 500 ℃ (932 °F) | |
| Coefficient of thermal expansion， μm/m · °C (μin./in. · °F) | 10.4 (5.8)， at 0-100 ℃ (32-212 °F) |
| 11.0 (6.1)， at 0-315 ℃ (32-600 °F) | |
| 11.4 (6.3)， at 0-538 ℃ (32-1000 °F) |
SS430 Stainless Steel Heat Treatment
- Annealing: Recommended annealing treatment for 430 steel is 705-790 °C (1300-1450 °F).
- Forging: Typical forging temperature for SS430 is 815-1120 °C (1500-2050 °F).
Heat Resistance
| Maximum service temperatures， °C (°F) | ||
| AISI | Intermittent service | Continuous service |
| 430 | 870 (1600) | 815 (1500) |
