| Overview of materials for T 600 Series Stainless Steel | |
|---|---|
| Categories: | MetalFerrous MetalStainless SteelT 600 Series Stainless Steel |
| Material Notes: | This property data is a summary of similar materials in the MatWeb database for the category “T 600 Series Stainless Steel”. Each property range of values reported is minimum and maximum values of appropriate MatWeb entries. The comments report the average value, and number of data points used to calculate the average. The values are not necessarily typical of any specific grade, especially less common values and those that can be most affected by additives or processing methods. |
| Vendors: | No vendors are listed for this material. Please click here if you are a supplier and would like information on how to add your listing to this material. |
 Printer friendly version Download to Excel (requires Excel and Windows)
Add to Folder: | |
Export data to your CAD/FEA program| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 7.59 – 8.25 g/cc | 0.274 – 0.298 lb/in³ | Average value: 7.93 g/cc Grade Count:36 |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Brinell | 255 – 388 | 255 – 388 | Average value: 307 Grade Count:3 |
| Hardness, Rockwell B | 86.0 – 91.0 | 86.0 – 91.0 | Average value: 88.3 Grade Count:3 |
| Hardness, Rockwell C | 26.5 – 35.0 | 26.5 – 35.0 | Average value: 30.6 Grade Count:3 |
| Hardness, Vickers | 160 – 330 | 160 – 330 | Average value: 251 Grade Count:4 |
| Tensile Strength, Ultimate | 550 – 1720 MPa | 79800 – 249000 psi | Average value: 1100 MPa Grade Count:33 |
| Tensile Strength, Yield | 52.2 – 1590 MPa | 7570 – 230000 psi | Average value: 848 MPa Grade Count:30 |
| Elongation at Break | 3.00 – 63.0 % | 3.00 – 63.0 % | Average value: 23.0 % Grade Count:29 |
| Reduction of Area | 5.50 – 60.0 % | 5.50 – 60.0 % | Average value: 43.2 % Grade Count:23 |
| Modulus of Elasticity | 197 – 200 GPa | 28600 – 29000 ksi | Average value: 200 GPa Grade Count:34 |
| Machinability | 18.0 – 45.0 % | 18.0 – 45.0 % | Average value: 37.3 % Grade Count:7 |
| Charpy Impact | 20.3 – 87.0 J | 15.0 – 64.2 ft-lb | Average value: 58.4 J Grade Count:8 |
| Electrical Properties | Metric | English | Comments |
| Electrical Resistivity | 0.0000800 – 0.0000942 ohm-cm | 0.0000800 – 0.0000942 ohm-cm | Average value: 0.0000857 ohm-cm Grade Count:5 |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 14.0 – 19.4 µm/m-°C | 7.78 – 10.8 µin/in-°F | Average value: 17.5 µm/m-°C Grade Count:33 |
| Specific Heat Capacity | 0.420 – 0.500 J/g-°C | 0.100 – 0.120 BTU/lb-°F | Average value: 0.455 J/g-°C Grade Count:33 |
| Thermal Conductivity | 12.3 – 34.3 W/m-K | 85.4 – 238 BTU-in/hr-ft²-°F | Average value: 13.6 W/m-K Grade Count:34 |
| Melting Point | 1300 – 1440 °C | 2370 – 2620 °F | Average value: 1400 °C Grade Count:31 |
| Solidus | 1300 – 1420 °C | 2370 – 2590 °F | Average value: 1370 °C Grade Count:31 |
| Liquidus | 1360 – 1440 °C | 2470 – 2620 °F | Average value: 1420 °C Grade Count:31 |
| Maximum Service Temperature, Air | 780 – 1040 °C | 1440 – 1900 °F | Average value: 897 °C Grade Count:31 |
| Component Elements Properties | Metric | English | Comments |
| Aluminum, Al | 0.0350 % | 0.0350 % | Average value: 0.0350 % Grade Count:24 |
| Boron, B | 0.00100 – 0.0100 % | 0.00100 – 0.0100 % | Average value: 0.00550 % Grade Count:24 |
| Carbon, C | 0.0150 – 0.350 % | 0.0150 – 0.350 % | Average value: 0.108 % Grade Count:36 |
| Chromium, Cr | 13.5 – 22.5 % | 13.5 – 22.5 % | Average value: 16.3 % Grade Count:36 |
| Copper, Cu | 0.250 – 4.00 % | 0.250 – 4.00 % | Average value: 0.466 % Grade Count:34 |
| Iron, Fe | 31.0 – 70.5 % | 31.0 – 70.5 % | Average value: 56.0 % Grade Count:36 |
| Manganese, Mn | 0.500 – 2.00 % | 0.500 – 2.00 % | Average value: 1.77 % Grade Count:34 |
| Molybdenum, Mo | 0.200 – 4.30 % | 0.200 – 4.30 % | Average value: 1.99 % Grade Count:11 |
| Nickel, Ni | 3.00 – 27.0 % | 3.00 – 27.0 % | Average value: 21.8 % Grade Count:36 |
| Niobium, Nb (Columbium, Cb) | 0.150 – 0.600 % | 0.150 – 0.600 % | Average value: 0.428 % Grade Count:8 |
| Nitrogen, N | 0.0500 – 0.200 % | 0.0500 – 0.200 % | Average value: 0.145 % Grade Count:4 |
| Phosphorus, P | 0.0200 – 0.0400 % | 0.0200 – 0.0400 % | Average value: 0.0391 % Grade Count:34 |
| Silicon, Si | 0.300 – 5.60 % | 0.300 – 5.60 % | Average value: 1.15 % Grade Count:34 |
| Sulfur, S | 0.0130 – 0.0300 % | 0.0130 – 0.0300 % | Average value: 0.0292 % Grade Count:34 |
| Tantalum, Ta | 0.150 – 0.500 % | 0.150 – 0.500 % | Average value: 0.433 % Grade Count:3 |
| Titanium, Ti | 0.100 – 2.35 % | 0.100 – 2.35 % | Average value: 1.80 % Grade Count:29 |
| Tungsten, W | 1.00 – 3.00 % | 1.00 – 3.00 % | Average value: 1.70 % Grade Count:7 |
| Vanadium, V | 0.100 – 0.500 % | 0.100 – 0.500 % | Average value: 0.300 % Grade Count:24 |
Some of the values displayed above may have been converted from their original units and/or rounded in order to
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb’s terms of use regarding this information.
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb’s terms of use regarding this information.
Click here to view
all the property values for this datasheet as they were originally entered into MatWeb.