| AISI 1080 Steel, cold drawn, spheroidized annealed, 19-32 mm (0.75-1.25 in) round | |
|---|---|
| Categories: | MetalFerrous MetalCarbon SteelAISI 1000 Series SteelHigh Carbon Steel |
| Material Notes: | Similar to AISI 1055 and AISI 1074. |
| Key Words: | UNS G10800, carbon steels |
| Vendors: | No vendors are listed for this material. Please click here if you are a supplier and would like information on how to add your listing to this material. |
 Printer friendly version Download to Excel (requires Excel and Windows)
Add to Folder: | |
Export data to your CAD/FEA program| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 7.85 g/cc | 0.284 lb/in³ | |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Brinell | 192 | 192 | |
| Hardness, Knoop | 214 | 214 | Converted from Brinell |
| Hardness, Rockwell B | 91 | 91 | Converted from Brinell |
| Hardness, Rockwell C | 11 | 11 | Converted from Brinell hardness. Value below normal HRC range, for comparison purposes only. |
| Hardness, Vickers | 201 | 201 | Converted from Brinell |
| Tensile Strength, Ultimate | 675 MPa | 97900 psi | |
| Tensile Strength, Yield | 515 MPa | 74700 psi | |
| Elongation at Break | 10 % | 10 % | In 50 mm |
| Reduction of Area | 40 % | 40 % | |
| Modulus of Elasticity | 205 GPa | 29700 ksi | Typical for steel |
| Bulk Modulus | 160 GPa | 23200 ksi | Typical for steel |
| Poissons Ratio | 0.29 | 0.29 | Typical For Steel |
| Machinability | 45 % | 45 % | Based on AISI 1212 steel = 100% |
| Shear Modulus | 80.0 GPa | 11600 ksi | Typical for steel |
| Electrical Properties | Metric | English | Comments |
| Electrical Resistivity | 0.0000180 ohm-cm @Temperature 20.0 °C | 0.0000180 ohm-cm @Temperature 68.0 °F | condition of specimen unknown |
| Thermal Properties | Metric | English | Comments |
CTE, linear  | 11.0 µm/m-°C @Temperature 0.000 – 100 °C | 6.11 µin/in-°F @Temperature 32.0 – 212 °F | |
| 12.2 µm/m-°C @Temperature 0.000 – 300 °C | 6.78 µin/in-°F @Temperature 32.0 – 572 °F | ||
| 13.7 µm/m-°C @Temperature 0.000 – 500 °C | 7.61 µin/in-°F @Temperature 32.0 – 932 °F | ||
| Specific Heat Capacity | 0.490 J/g-°C | 0.117 BTU/lb-°F | 50-100ºC |
| Thermal Conductivity | 47.7 W/m-K | 331 BTU-in/hr-ft²-°F | 0ºC |
| Component Elements Properties | Metric | English | Comments |
| Carbon, C | 0.75 – 0.88 % | 0.75 – 0.88 % | |
| Iron, Fe | 98.13 – 98.65 % | 98.13 – 98.65 % | As remainder |
| Manganese, Mn | 0.60 – 0.90 % | 0.60 – 0.90 % | |
| Phosphorus, P | <= 0.040 % | <= 0.040 % | |
| Sulfur, S | <= 0.050 % | <= 0.050 % | |
References for this datasheet.
Some of the values displayed above may have been converted from their original units and/or rounded in order to
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb’s terms of use regarding this information.
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb’s terms of use regarding this information.
Click here to view
all the property values for this datasheet as they were originally entered into MatWeb.