| AISI 1042 Steel, Cold Drawn Bar (UNS G10420) | |
|---|---|
| Categories: | MetalFerrous MetalCarbon SteelAISI 1000 Series SteelMedium Carbon Steel |
| Key Words: | UNS G10420 |
| Vendors: | No vendors are listed for this material. Please click here if you are a supplier and would like information on how to add your listing to this material. |
 Printer friendly version Download to Excel (requires Excel and Windows)
Add to Folder: | |
Export data to your CAD/FEA program| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 7.85 g/cc | 0.284 lb/in³ | Typical Carbon Steel |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Brinell | >= 179 | >= 179 | |
| Tensile Strength, Ultimate | >= 614 MPa | >= 89000 psi | |
| Tensile Strength, Yield | >= 517 MPa | >= 75000 psi | |
| Elongation at Break | >= 12 % | >= 12 % | in 2 in. (50 mm) |
| Reduction of Area | >= 35 % | >= 35 % | |
| Modulus of Elasticity | 200 GPa | 29000 ksi | Typical Carbon Steel |
| Poissons Ratio | 0.29 | 0.29 | Typical Carbon Steel |
| Machinability | 60 % | 60 % | Cold Drawn AISI 1212 = 100% |
| Shear Modulus | 78.0 GPa | 11300 ksi | Typical Carbon Steel |
| Electrical Properties | Metric | English | Comments |
| Electrical Resistivity | 0.0000170 ohm-cm | 0.0000170 ohm-cm | Typical Carbon Steel |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 12.0 µm/m-°C | 6.67 µin/in-°F | Typical Carbon Steel |
| Specific Heat Capacity | 0.470 J/g-°C | 0.112 BTU/lb-°F | Typical Carbon Steel |
| Thermal Conductivity | 52.0 W/m-K | 361 BTU-in/hr-ft²-°F | Typical Carbon Steel |
| Component Elements Properties | Metric | English | Comments |
| Carbon, C | 0.40 – 0.47 % | 0.40 – 0.47 % | |
| Iron, Fe | 98.54 – 99 % | 98.54 – 99 % | As Balance |
| Manganese, Mn | 0.60 – 0.90 % | 0.60 – 0.90 % | |
| Phosphorus, P | <= 0.040 % | <= 0.040 % | |
| Sulfur, S | <= 0.050 % | <= 0.050 % | |
References for this datasheet.
Some of the values displayed above may have been converted from their original units and/or rounded in order to
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb’s terms of use regarding this information.
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb’s terms of use regarding this information.
Click here to view
all the property values for this datasheet as they were originally entered into MatWeb.