| AISI 1030 Steel, normalized at 925°C (1700°F), air cooled, 100 mm (4 in.) round | |
|---|---|
| Categories: | MetalFerrous MetalCarbon SteelAISI 1000 Series SteelMedium Carbon Steel |
| Material Notes: | Applications include levers, bolts, studs, nuts, and similar parts which are headed, upset, or extruded. Wires uses include nails requiring high shank rigidity or strength and quench-hardened nails. Post water quenched hardness: 97 HRB surface, 88 HRB half-radius, 85 HRB surface |
| Key Words: | UNS G10300, ASTM A29, ASTM A108, ASTM A510, ASTM A512, ASTM A519, ASTM A544, ASTM A545, ASTM A546, ASTM A576, ASTM A682, FED QQ-S-635 (C1030), FED QQ-S-700 (C1030), MIL SPEC MIL-S-11310 (CS1030), SAE J403, SAE J412, SAE J414, DIN 1.1172, UNI CB 35 |
| Vendors: | No vendors are listed for this material. Please click here if you are a supplier and would like information on how to add your listing to this material. |
 Printer friendly version Download to Excel (requires Excel and Windows)
Add to Folder: | |
Export data to your CAD/FEA program| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 7.87 g/cc | 0.284 lb/in³ | Typical for steels. |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Brinell | 137 | 137 | |
| Hardness, Knoop | 156 | 156 | Converted from Brinell |
| Hardness, Rockwell B | 75 | 75 | Converted from Brinell |
| Hardness, Vickers | 143 | 143 | Converted from Brinell |
| Tensile Strength, Ultimate | 495 MPa | 71800 psi | |
| Tensile Strength, Yield | 325 MPa | 47100 psi | |
| Elongation at Break | 29.7 % | 29.7 % | in 50 mm |
| Reduction of Area | 56.2 % | 56.2 % | |
| Modulus of Elasticity | 206 GPa | 29900 ksi | |
| Bulk Modulus | 163 GPa | 23600 ksi | Estimated from elastic modulus |
| Poissons Ratio | 0.29 | 0.29 | Typical for steel |
| Shear Modulus | 80.0 GPa | 11600 ksi | Estimated from elastic modulus |
| Izod Impact | 94.0 J | 69.3 ft-lb | |
| Electrical Properties | Metric | English | Comments |
| Electrical Resistivity | 0.0000166 ohm-cm @Temperature 20.0 °C | 0.0000166 ohm-cm @Temperature 68.0 °F | annealed specimen |
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 11.7 µm/m-°C @Temperature 15.0 – 75.0 °C | 6.50 µin/in-°F @Temperature 59.0 – 167 °F | |
| Specific Heat Capacity | 0.486 J/g-°C @Temperature >=100 °C | 0.116 BTU/lb-°F @Temperature >=212 °F | annealed |
Thermal Conductivity  | 43.6 W/m-K @Temperature 100 °C | 303 BTU-in/hr-ft²-°F @Temperature 212 °F | Estimated |
| 50.7 W/m-K @Temperature 0.000 °C | 352 BTU-in/hr-ft²-°F @Temperature 32.0 °F | Estimated | |
| Component Elements Properties | Metric | English | Comments |
| Carbon, C | 0.27 – 0.34 % | 0.27 – 0.34 % | |
| Iron, Fe | 98.67 – 99.13 % | 98.67 – 99.13 % | As remainder |
| Manganese, Mn | 0.60 – 0.90 % | 0.60 – 0.90 % | |
| Phosphorus, P | <= 0.040 % | <= 0.040 % | |
| Sulfur, S | <= 0.050 % | <= 0.050 % | |
References for this datasheet.
Some of the values displayed above may have been converted from their original units and/or rounded in order to
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb’s terms of use regarding this information.
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb’s terms of use regarding this information.
Click here to view
all the property values for this datasheet as they were originally entered into MatWeb.