| AISI 1016 Steel, cold drawn, 19-32 mm (0.75-1.25 in) round | |
|---|---|
| Categories: | MetalFerrous MetalCarbon SteelAISI 1000 Series SteelLow Carbon Steel |
| Material Notes: | Most widely used in cold forming operations such as heading, upsetting, and extrusion. |
| Key Words: | UNS G10160, ASTM A29, ASTM A108, ASTM A510, ASTM A513, ASTM A545, carbon steels, ASTM A548, ASTM A549, ASTM A576, ASTM A659, MIL SPEC MIL-S-866, SAE J403, SAE J412, SAE J414, DIN 1.0419, DIN 1.1142, DIN GS-Ck16, DIN RSt44.2, DIN 17115 1.0467, DIN 17115 1.0468, DIN 17115 15Mn3, DIN 17115 15Mn3Al, BS 3059 440, BS 3606 440, BS 970 080A15, BS 970 080M15, BS 970 170H15, BS 970 173H16, EN32, AISI1016 |
| Vendors: | No vendors are listed for this material. Please click here if you are a supplier and would like information on how to add your listing to this material. |
 Printer friendly version Download to Excel (requires Excel and Windows)
Add to Folder: | |
Export data to your CAD/FEA program| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 7.87 g/cc | 0.284 lb/in³ | |
| Mechanical Properties | Metric | English | Comments |
| Hardness, Brinell | 121 | 121 | |
| Hardness, Knoop | 140 | 140 | Converted from Brinell |
| Hardness, Rockwell B | 68 | 68 | Converted from Brinell |
| Hardness, Vickers | 126 | 126 | Converted from Brinell |
| Tensile Strength, Ultimate | 420 MPa | 60900 psi | |
| Tensile Strength, Yield | 350 MPa | 50800 psi | |
| Elongation at Break | 18 % | 18 % | In 50 mm |
| Reduction of Area | 40 % | 40 % | |
| Modulus of Elasticity | 205 GPa | 29700 ksi | Typical for steel |
| Bulk Modulus | 160 GPa | 23200 ksi | Typical for steel |
| Poissons Ratio | 0.29 | 0.29 | Typical For Steel |
| Machinability | 70 % | 70 % | Based on AISI 1212 steel = 100% |
| Shear Modulus | 80.0 GPa | 11600 ksi | Typical for steel |
| Electrical Properties | Metric | English | Comments |
Electrical Resistivity  | 0.0000160 ohm-cm @Temperature 0.000 °C | 0.0000160 ohm-cm @Temperature 32.0 °F | annealed condition |
| 0.0000220 ohm-cm @Temperature 100 °C | 0.0000220 ohm-cm @Temperature 212 °F | annealed condition | |
| 0.0000290 ohm-cm @Temperature 200 °C | 0.0000290 ohm-cm @Temperature 392 °F | annealed condition | |
| Thermal Properties | Metric | English | Comments |
| Specific Heat Capacity | 0.481 J/g-°C @Temperature >=100 °C | 0.115 BTU/lb-°F @Temperature >=212 °F | annealed |
| 0.515 J/g-°C @Temperature 150 – 200 °C | 0.123 BTU/lb-°F @Temperature 302 – 392 °F | ||
| 0.595 J/g-°C @Temperature 350 – 400 °C | 0.142 BTU/lb-°F @Temperature 662 – 752 °F | ||
| Thermal Conductivity | 51.9 W/m-K | 360 BTU-in/hr-ft²-°F | estimated based on similar materials |
| Component Elements Properties | Metric | English | Comments |
| Carbon, C | 0.12 – 0.18 % | 0.12 – 0.18 % | |
| Iron, Fe | 99.13 – 99.58 % | 99.13 – 99.58 % | As remainder |
| Manganese, Mn | 0.60 – 0.90 % | 0.60 – 0.90 % | |
| Phosphorus, P | <= 0.040 % | <= 0.040 % | |
| Sulfur, S | <= 0.050 % | <= 0.050 % | |
References for this datasheet.
Some of the values displayed above may have been converted from their original units and/or rounded in order to
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb’s terms of use regarding this information.
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb’s terms of use regarding this information.
Click here to view
all the property values for this datasheet as they were originally entered into MatWeb.