| AISI 1010 Steel, CQ sheet,1.6-5.8 mm round or thickness | |
|---|---|
| Categories: | MetalFerrous MetalCarbon SteelAISI 1000 Series SteelLow Carbon Steel |
| Material Notes: | Easily cold formed by heading, extruding, upsetting, bending, and other deforming processes. Uses for wires include electroplated products, such as racks, storage bins, shopping carts, fan guards, and jewelry, and unplated such as wires, staples, hardware, and barbed wire. |
| Key Words: | UNS G10100, AMS 5040, AMS 5042, AMS 5044, AMS 5047, AMS 5053, ASTM A29, ASTM A108, ASTM A510, ASTM A519, ASTM A545, ASTM A549, ASTM A575, ASTM A576, MIL SPEC MIL-S-11310 (CS1010), JIS S 9 CK, SAE J403, SAE J412, SAE J414, DIN 1.1121, AFNOR XC 10 (Fr), JIS S10 C, JIS S 12 C, AISI1010 |
| Vendors: | No vendors are listed for this material. Please click here if you are a supplier and would like information on how to add your listing to this material. |
 Printer friendly version Download to Excel (requires Excel and Windows)
Add to Folder: | |
Export data to your CAD/FEA program| Physical Properties | Metric | English | Comments |
|---|---|---|---|
| Density | 7.87 g/cc | 0.284 lb/in³ | Typical for steel |
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength, Ultimate | 310 – 360 MPa | 45000 – 52200 psi | |
| Tensile Strength, Yield | 180 – 240 MPa | 26100 – 34800 psi | |
| Elongation at Break | 32 – 48 % | 32 – 48 % | in 50 mm |
| Modulus of Elasticity | 200 GPa | 29000 ksi | Typical for steel |
| Bulk Modulus | 160 GPa | 23200 ksi | Typical for steel |
| Poissons Ratio | 0.29 | 0.29 | Typical For Steel |
| Machinability | 55 % | 55 % | Based on AISI 1212 steel = 100%. Group I bar, rod, and wire products machinability can be improved by cold drawing. |
| Shear Modulus | 80.0 GPa | 11600 ksi | Typical for steel |
| Electrical Properties | Metric | English | Comments |
| Electrical Resistivity | 0.0000143 ohm-cm | 0.0000143 ohm-cm | condition unknown |
| Thermal Properties | Metric | English | Comments |
CTE, linear  | 12.2 µm/m-°C @Temperature 0.000 – 100 °C | 6.78 µin/in-°F @Temperature 32.0 – 212 °F | |
| 13.0 µm/m-°C @Temperature 0.000 – 200 °C | 7.22 µin/in-°F @Temperature 32.0 – 392 °F | ||
| 13.5 µm/m-°C @Temperature 0.000 – 300 °C | 7.50 µin/in-°F @Temperature 32.0 – 572 °F | ||
| 13.8 µm/m-°C @Temperature 0.000 – 400 °C | 7.67 µin/in-°F @Temperature 32.0 – 752 °F | ||
| 14.2 µm/m-°C @Temperature 0.000 – 500 °C | 7.89 µin/in-°F @Temperature 32.0 – 932 °F | ||
| 14.6 µm/m-°C @Temperature 0.000 – 600 °C | 8.11 µin/in-°F @Temperature 32.0 – 1110 °F | ||
| 14.9 µm/m-°C @Temperature 0.000 – 700 °C | 8.28 µin/in-°F @Temperature 32.0 – 1290 °F | ||
| Specific Heat Capacity | 0.448 J/g-°C @Temperature >=100 °C | 0.107 BTU/lb-°F @Temperature >=212 °F | condition unknown |
| 0.498 J/g-°C @Temperature 150 – 200 °C | 0.119 BTU/lb-°F @Temperature 302 – 392 °F | ||
| 0.519 J/g-°C @Temperature 200 – 250 °C | 0.124 BTU/lb-°F @Temperature 392 – 482 °F | ||
| 0.536 J/g-°C @Temperature 250 – 300 °C | 0.128 BTU/lb-°F @Temperature 482 – 572 °F | ||
| 0.565 J/g-°C @Temperature 300 – 350 °C | 0.135 BTU/lb-°F @Temperature 572 – 662 °F | ||
| 0.590 J/g-°C @Temperature 350 – 400 °C | 0.141 BTU/lb-°F @Temperature 662 – 752 °F | ||
| 0.649 J/g-°C @Temperature 400 – 450 °C | 0.155 BTU/lb-°F @Temperature 752 – 842 °F | ||
| 0.729 J/g-°C @Temperature 550 – 600 °C | 0.174 BTU/lb-°F @Temperature 1020 – 1110 °F | ||
| 0.825 J/g-°C @Temperature 650 – 700 °C | 0.197 BTU/lb-°F @Temperature 1200 – 1290 °F | ||
| Thermal Conductivity | 51.9 W/m-K | 360 BTU-in/hr-ft²-°F | Typical steel |
| Component Elements Properties | Metric | English | Comments |
| Carbon, C | 0.080 – 0.13 % | 0.080 – 0.13 % | |
| Iron, Fe | 99.18 – 99.62 % | 99.18 – 99.62 % | As remainder |
| Manganese, Mn | 0.30 – 0.60 % | 0.30 – 0.60 % | |
| Phosphorus, P | <= 0.040 % | <= 0.040 % | |
| Sulfur, S | <= 0.050 % | <= 0.050 % | |
References for this datasheet.
Some of the values displayed above may have been converted from their original units and/or rounded in order to
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb’s terms of use regarding this information.
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb’s terms of use regarding this information.
Click here to view
all the property values for this datasheet as they were originally entered into MatWeb.