Neodymium, Nd



Neodymium, Nd

Categories: MetalNonferrous MetalPure Element

Material Notes: Silver Metal; Hexagonal

Vendors: Click here to view all available suppliers for this material.

Please click here if you are a supplier and would like information on how to add your listing to this material.

 
Physical PropertiesMetricEnglishComments
Density 7.01 g/cc0.253 lb/in³
 
Chemical PropertiesMetricEnglishComments
Atomic Mass 144.24144.241995
Atomic Number 6060
X-ray Absorption Edge 0.28451 Å0.28451 ÅK
 1.73759 Å1.73759 ÅLI
 1.84244 Å1.84244 ÅLII
 1.99452 Å1.99452 ÅLIII
Electronegativity 1.141.14Pauling
Ionic Radius 0.995 Å0.995 ÅCrystal Ionic Radius for Valence +3
 
Mechanical PropertiesMetricEnglishComments
Hardness, Vickers 1818
Tensile Strength, Ultimate 170 MPa24700 psi
Tensile Strength, Yield 165 MPa23900 psi
Elongation at Break 25 %25 %
Modulus of Elasticity 41.4 GPa6000 ksi
Bulk Modulus 31.8 GPa4610 ksi
Poissons Ratio 0.2810.281
Shear Modulus 16.3 GPa2360 ksi
 
Electrical PropertiesMetricEnglishComments
Electrical Resistivity 0.0000643 ohm-cm0.0000643 ohm-cm
Magnetic Susceptibility 0.00003920.0000392cgs/g
 
Thermal PropertiesMetricEnglishComments
Heat of Fusion 49.3 J/g21.2 BTU/lb
CTE, linear 9.60 µm/m-°C
@Temperature 20.0 °C
5.33 µin/in-°F
@Temperature 68.0 °F
Specific Heat Capacity 0.153 J/g-°C0.0366 BTU/lb-°FGas
 0.190 J/g-°C0.0454 BTU/lb-°F
Thermal Conductivity 13.0 W/m-K90.2 BTU-in/hr-ft²-°F
Melting Point 1010 °C1850 °F
Boiling Point 3074 °C5565 °F
Heat of Formation 0.000 kJ/mol0.000 kJ/molCrystal
 327.6 kJ/mol327.6 kJ/molGas
 
Optical PropertiesMetricEnglishComments
Emissivity (0-1) 0.394
@Wavelength >=645 nm,
Temperature 1021 – 1567 °C
0.394
@Wavelength >=645 nm,
Temperature 1870 – 2853 °F
liquid total hemispherical
 
Component Elements PropertiesMetricEnglishComments
Neodymium, Nd 100 %100 %
 
Descriptive Properties
CAS Number7440-00-8

References for this datasheet.

Some of the values displayed above may have been converted from their original units and/or rounded in order to
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb’s terms of use regarding this information.

Click here to view
all the property values for this datasheet as they were originally entered into MatWeb.





Leave a Comment

Your email address will not be published. Required fields are marked *