Erbium, Er


Erbium, Er

Categories: MetalNonferrous MetalPure Element

Vendors: Click here to view all available suppliers for this material.

Please click here if you are a supplier and would like information on how to add your listing to this material.

 
Physical PropertiesMetricEnglishComments
Density 9.05 g/cc0.327 lb/in³
 
Chemical PropertiesMetricEnglishComments
Atomic Mass 167.26167.261995
Atomic Number 6868
X-ray Absorption Edge 0.21565 Å0.21565 ÅK
 1.27086 Å1.27086 ÅLI
 1.33721 Å1.33721 ÅLII
 1.48242 Å1.48242 ÅLIII
Electronegativity 1.241.24Pauling
Ionic Radius 0.881 Å0.881 ÅCrystal Ionic Radius for Valence +3
 
Mechanical PropertiesMetricEnglishComments
Hardness, Vickers 4242
Tensile Strength, Ultimate 136 MPa19700 psi
Tensile Strength, Yield 60.0 MPa8700 psi
Elongation at Break 11.5 %11.5 %
Reduction of Area 11.9 %11.9 %
Tensile Modulus 69.9 GPa10100 ksi
Bulk Modulus 44.4 GPa6440 ksi
Poissons Ratio 0.2370.237
Shear Modulus 28.3 GPa4100 ksi
 
Electrical PropertiesMetricEnglishComments
Electrical Resistivity 0.0000850 ohm-cm0.0000850 ohm-cm
Magnetic Susceptibility 0.0002640.000264cgs/g
Curie Temperature -253 °C-423 °F
 
Thermal PropertiesMetricEnglishComments
Heat of Fusion 103 J/g44.3 BTU/lb
CTE, linear 12.2 µm/m-°C
@Temperature 20.0 °C
6.78 µin/in-°F
@Temperature 68.0 °F
Specific Heat Capacity 0.170 J/g-°C0.0406 BTU/lb-°F
Thermal Conductivity 9.60 W/m-K66.6 BTU-in/hr-ft²-°F
Melting Point 1522 °C2772 °F
Boiling Point 2868 °C5194 °F
 
Optical PropertiesMetricEnglishComments
Emissivity (0-1) 0.372
@Wavelength >=645 nm,
Temperature 1027 – 1587 °C
0.372
@Wavelength >=645 nm,
Temperature 1881 – 2889 °F
solid and liquid
 
Component Elements PropertiesMetricEnglishComments
Erbium, Er 100 %100 %
 
Descriptive Properties
CAS Number7440-52-0

References for this datasheet.

Some of the values displayed above may have been converted from their original units and/or rounded in order to
display the information in a consistent format. Users requiring more precise data for scientific or engineering
calculations can click on the property value to see the original value as well as raw conversions to equivalent units.
We advise that you only use the original value or one of its raw conversions in your calculations to minimize rounding
error. We also ask that you refer to MatWeb’s terms of use regarding this information.

Click here to view
all the property values for this datasheet as they were originally entered into MatWeb.





Leave a Comment

Your email address will not be published. Required fields are marked *