Copper Nickel Eccentric Ruducer ASTM B466 C70600 6" X 8" SCH80 Butt Weld Pipe Fitting

Copper Nickel Eccentric Ruducer ASTM B466 C70600 6" X 8" SCH80 Butt Weld Pipe Fitting

The copper-nickel fittings manufactured by TONG CHUANG GROUP and Tubes are designed to provide high performance in extreme environments.
In addition， the wall thickness design of our CuNi pipe fittings has sufficient erosion and corrosion margin. We stock the full range of CuNi 90
10 fittings in SCH5， SCH10， SCH40， SCH80， SCH160， SCH XS， SCH XXS， sizes from 1/8" NB to 24" NB. We have a lot of inventory
Various forms of butt welding joints， such as end caps， short pipes， pipe joints， equal diameter tees， unequal diameter tees， concentric reducers， eccentric reducers， Collar， long radius elbow， short radius elbow， back bend， elbow， coupling. All our products are tested under expert supervision and testing
Factory test certificate， EN 10204 3.1， chemical report， mechanical report， destructive test report， non-destructive testing and other documents
Provide test reports， PM test reports， visual inspection reports， third-party inspection reports， and NABL approved laboratory reports. pipeline
Pipe fittings have many applications in oil， natural gas， filtration， refrigeration， oil refining， petrochemical and offshore industries. we have already
Export butt welded pipe fittings to Australia， Saudi Arabia， South Africa and other countries. UAE， United States， Germany， Thailand， UK. etc.

1 Scope

This specification establishes the requirements for seamless copper-nickel pipe and tube in straight lengths， suitable for general engineering purposes. The alloys involved are copper alloys UNS Nos. C70400， C70600， C70620， C71000， C71500， C71520， and C72200.

Copper-nickel pipe fittings are used to connect straight pipe sections or pipe sections in piping systems， adapt to different sizes or shapes， and are used for
Other uses， such as adjusting fluid flow. Pipe fittings are used in piping systems to change direction or function， which is mechanical
Join the system. The easiest way to achieve this is to bend the pipe to the desired direction， but this process stretches and thins the pipe
The outer wall of the tube is thickened and wrinkled at the same time， and the inner wall of the tube. This leads to flow resistance and accelerated wall erosion.
CuNi90 10 pipe fittings are manufactured and completed according to international standards STM B466 UNS C70600， ASME B16.9， ANSI
B16.9， ASME B16.28， ANSI B16.28， ANSI B16.25， MSS-SP-43 and MSS SP-75. Our CuNi 90 10 butt welding accessories series includes elbows，
Various sizes and forms of tees， crosses， caps， reducers， collars， elbows.

Specification:

• Steel Grades;
• Mechanical Properties;
• Dimensions and Tolerances;
• Requirements for Inspection and Testing;
• Inspection Documents;
• Marking;
• Handling and Packaging.