ASTM SB163 UNS N04400 MONEL 400 NICKEL ALLOY FINNED TUBE HEAT EXCHANGER NDE AVAILABLE

ASTM SB163 UNS N04400 MONEL 400 FINNED TUBE， NICKEL ALLOY TUBE FOR HEATING

TONG CHUANG GROUP deal with Stainless/Duplex/ Nickel steel and tube already more than 10 years， every year sell more than 80000 tons of Stainless/Duplex/ Nickel steel and tube. Our client already cover more than 45 countries. Our Stainless Steel and tube was width used in Mining， Energy， Petrochemical， Chemical Industry， Food plant， Paper plant， Gas and Fluid Industry etc. ANSI B16.10: B16.19 SCH 5S， SCH 10S， SCH 20， SCH 30， SCH 40S， SCH 60， SCH80S， XS， SCH 100， SCH 120， SCH160， XXS

Monel 400®， Nickelvac® 400， Nicorros® 400
 

Monel 400 is a combination of nickel and copper and is hardened by cold working only. This alloy is widely renowned for for its corrosion resistant properties against flowing sea – water and is extensively used for marine applications. Monel is also extremely resistant to stress corrosion cracking in most freshwaters. High temperature ( up to 1000 °F) has no effect on this alloy and it also has excellent mechanical properties at subzero temperatures.

Monel 400 is available in many forms like wire ， Round bar， Forged bar ， hex bar ， Flat bar ， Circles ， Ring ， Tube ， ， Welded / ERW Pipe ， Sheet ， Plate ， Coil ， Flanges ， fasteners ， Socket weld Fittings ， ferrule fittings ， Buttweld fittings Like cap ， elbow ， tee. UNS N04400 is available in various forms like Monel 400 wire ， Monel 400 Round bar， Monel 400 Forged bar ， Monel 400 hex bar ， Monel 400 Flat bar ， Monel 400 Circles ， Monel 400 Ring ， Monel 400 Tube ， Monel 400 ， Monel 400 Welded / ERW Pipe ， Monel 400 Sheet ， Monel 400 Plate ， Monel 400 Coil ， Monel 400 Flanges ， Monel 400 fasteners ， Monel 400 Socket weld Fittings ， Monel 400 ferrule fittings ， Monel 400 Buttweld fittings Like cap ， elbow ， tee ， Reducer.

UNS N04400 is available in various forms like cap， elbow， erw pipes， fasteners， fittings， flange， plate， reducer， round bar，， sheet， tee and tube.

Chemical Analysis of ALLOY 400 (UNS N04400)
Monel 400®， Nickelvac® 400， Nicorros® 400

Specifications

For a given tube or size， the required heat transfer can be obtained by specifying the appropriate fin length and fin thickness and/or the number of fin tubes per meter length.

HFW Solid Finned Tube

This welded steel finned tube configuration can be used for any practically heat exchanger application， and is particularly suited to high temperature and high pressure applications. The important features of this configuration are efficient， effective bond of fin to tube under all conditions of temperature and pressure， and ability to withstand high fin-side temperatures.

A continuous helical fin is attached to the base tube by high frequency electric resistance welding in order to give an efficient and thermally reliable bond.

Technical Details/Base Tube Details

Tube Diameter : 20 mm OD Min to 219 mm OD Max.

Tube Thickness : Minimum 2 mm up to 16mm

Tube Material : Carbon Steel， Stainless Steel， Alloy Steel， Corten steel， duplex Steel， Super Duplex Steel， Inconel， High Chrome High Nickle & Incolloy， CK 20 material and some other material.

Fin Details

Fins Thickness : Min. 0.8 mm to Max. 4 mm

Fins Height : Min 0.25” (6.35 mm) To Max.1.5” (38 mm)

Fin Density : Min 43 Fins Per Meter To Max. 287 Fins Per Meter

Material : Carbon Steel， Stainless Steel， Alloy Steel， Corten steel， Duplex Steel and Incolloy.

For a rapid quotation， plz send with following requirement:

Number of pieces，

base tube: Diameter， thickness， length and material specification.

Fins: material specification， type (solid or serrated)， height， thickness， spacing， finned length and unfinned sections. Weld prep details if required.

Delivery period required.

Keywords: Fin tubes， Finned tube， Finned Pipe Helical Finned Tubes， Solid fin tubes， Serrated finned tube， Helical Serrated Finned Tubes， Tubos Aletados