| Fin Base Tube: | ASTM A179， ASTM A192， ASTM A210 A1， ASME SA179 ， ASME SA192， ASME SA210 GR. A1 | Fin Material: | 6061， 6063 |
|---|---|---|---|
| Fin Type: | Extruded ， Embedded ， HFW ， Rolling | Fin Tube Length: | Max. 25m/pc |
| High Light: | 6061 Aluminum Fin Tube， A192 Extruded Fin Tube， Air Cooling Extruded Fin Tube | ||
ASTM A192 / ASME SA192 Seamless Tube with Aluminum AL1060 Extruded Fin Tube Air Cooling Application
TONG CHUANG Group supply variety of extruded fin tubes in the industry. All of our products are domestically sourced， developed， and produced， which means our customers have immediate access to exactly the products they need for their particular application. And you are assured of the highest quality and manufacturing standards and a local， concerned， customer service presence.
The strong connection between fin and base tube prevents loosening of fin because of heat stress， oxidization， corrosion etc.， use at very high temperatures possible. This extruded finned tubes configuration can be used in practically any heat transfer applications， and particularly suited for high temperature， high pressure applications. The important features of this configuration are efficient， effective bond of fin to tube under any conditions of temperature and pressure， and ability to withstand high fin-side temperatures.
These tubes are used with a wide range of material such as carbon steel， low alloys steel and stainless steel for corrosive flue gas or high temperatures.
Tube/Pipe Size 5/8.00″ to 2″ OD
Fin Height 10 mm to 50.8mm
Fin Thickness 0.3mm ~ 0.6 mm
Fin Pitch 1 to 20 fins per inch
Materials Carbon Steel ，Alloy Steel ，Stainless Steel and Corrosion-resistance Steel.
Applications:
TONG CHUANG Group fin tubes are mainly used in heating (gas-fired boilers， condensing boilers， flue gas condensers)， in mechanical and automotive engineering(oil coolers， mine coolers， air coolers for diesel engines)， in chemical engineering (gas coolers and heater， process cooler)， in power plants(air cooler， cooling tower)， and in nuclear engineering(uranium enrichment plants).
| 1. MAXIMUM WORKING TEMPERATURE 285°C |
| 2. ATMOSPHERIC CORROSION RESISTANCE HIGH |
| 3.MECHANICAL RESISTANCE RESISTANC HIGH |
| 4.FIN MATERIALS ALUMINIUM， COPPER |
| 5. BASE TUBE MATERIALS Stainless Steel， Carbon Steel， Alloy Steel， Titanium， Copper， Duplex Stainless Steel， Inconel etc. (all material in the theoretical limit)l |
| Extruded finned tubes application: | ||
| 1.Operating temperatures less than 300°C; | ||
| 2.Offshore or other remote applications; | ||
| 3. Heat pipes; | ||
| 4. Dry air coolers for air， gas or oil; | ||
| 5. Air to air heat exchangers for HVAC applications; | ||
| 6. Air dehumidification in air treatment plants and | ||
| 7. Eenergy recovery in air exhaust system. |
